wicked drop visor installation

Discussion in 'Kenworth Forum' started by sean1966, May 19, 2013.

  1. sean1966

    sean1966 Bobtail Member

    9
    0
    Jan 27, 2013
    Bedford,Pa
    0
    has anyone installed one of these visors? Just got mine from valley chrome and the instuctions just aren't complete enough. I have a t800. Took the old brackets off and thought the new brakets would mount in the same holes,but no. Just thought I would ask here before I started drilling new holes
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. eeb

    eeb Heavy Load Member

    731
    268
    Mar 24, 2013
    0
    I've used "riv-nuts" to install aftermarket visors, kind of like large pop rivets with threads on the inside, should be available at your local auto parts store. Seal up the unused holes, line up, mark, and drill the new holes, and install the riv-nuts. Don't forget to use some sealant or caulk on the threads to keep moisture from leaking in.
     
  4. VisionLogistics

    VisionLogistics Road Train Member

    1,551
    978
    Dec 8, 2011
    Jellystone
    0
    I had to drill holes for mine on the W900L.
     
  5. allan5oh

    allan5oh Road Train Member

    1,557
    556
    Jan 6, 2010
    Winnipeg, mb
    0
    I have heard complaints about these visors not lining up.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.