where to find a liner for an aluminum end dump

Shame to have to use a nice aluminum wagon on hauling scrap, they take a beating. Can't help with finding a liner, but the whole inside will get roughed up hauling scrap.

 

i can't really says a beating from scrap.

the damage i've seen from my end dump experience. is them big boulders that literally get dropped in. and big chunks of concrete.

only scrap we hauled is building demolition. which didn't happen often. and was usually loaded with a trackhoe. nice and easy.

but i guess if you haul scrap on a daily basis.

 

Try calling any local trailer dealers near you? Finding one near you may be a stretch, may need to just order one in...
There's not much to them. Of all the liners I've seen, they only go up maybe 12-16" up the sides and there's a like a railing piece that runs the length of it, that you weld to the sides that will hold the liner in place... Here's a couple links for more info
http://www.aeroindustries.com/products/dump/dump_liners/

http://www.rrrsupply.com/products/poly-truck-liners/

http://www.superslide.com/

 

Here's a link to what is probably the best liner in the industry:
http://www.quadrantplastics.com/na-...tandard-175-f/quicksilver-R-truck-liners.html
They are NOT cheap. About $5000 for a 30' trailer, installed.

I had a 3/8 "rock" liner put in my 26' rust-bucket. It cost $2000, and may last another year or two.
I'll probably suck it up and buy the Quicksilver next time.

Even my cheap liner (if you can call $2k cheap) makes a huge difference in dumping. I never have to raise my trailer all the way up. That will help prevent turning over.
At only a 10-15 degree tilt, you can't stand up on it. It's really slick.

 

I will say that the Quick Silver is the way to go, have many load's hauled and little wear show's on the this liner

 

I regularly haul scrap metal to the SIMS facility in Mobile to sell scrap metal. My dump truck liner is way beyond its prime now. It has seen enough wear and tear and I think I’ll have to go in for a new one pretty soon! I see a lot of options here, guess I’ll try one of them. Thanks!