Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Volvo EGR Valve D12 D13 Replacement Compatibility

Discussion in 'Volvo Forum' started by J37, Jul 28, 2017.

  1. Jul 28, 2017 #1
    J37

    J37 Bobtail Member

    8
    0
    Apr 16, 2015
    0
    Hello,

    I have a Volvo D13 & need my EGR valve replaced. I've read in numerous places that the EGR valve for a D12 is compatible with the D13.

    I called a Volvo dealer and spoke to their parts department in regards to the compatibility. The representative told me, "I believe that they're compatible. But don't quote me on it."

    Has anybody replaced their D13 EGR valve with a D12 EGR valve without any issues? Thank you for your time and have a nice day.
     
    J37, Jul 28, 2017
    J37, Jul 28, 2017
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Jul 28, 2017 #2
    nasriza

    nasriza Road Train Member

    2,397
    2,070
    Feb 1, 2013
    Chicago, IL
    0
    they are nothing alike whoever told you this has no idea what each one is, different mounting different function different everything, nothing alike
     
    nasriza, Jul 28, 2017
    nasriza, Jul 28, 2017
    #2
    KB3MMX, flood and J37 Thank this.
  4. Jul 28, 2017 #3
    J37

    J37 Bobtail Member

    8
    0
    Apr 16, 2015
    0
    Thank you for your reply nasriza! I really appreciate it. Looks like it's time to buy an expensive D13 valve. : (
     
    J37, Jul 28, 2017
    J37, Jul 28, 2017
    #3
  5. Jul 28, 2017 #4
    nasriza

    nasriza Road Train Member

    2,397
    2,070
    Feb 1, 2013
    Chicago, IL
    0
    buy bolts as well since they dont come with it and most of the time they get messed up those are usually expensive as well. good luck.
     
    nasriza, Jul 28, 2017
    nasriza, Jul 28, 2017
    #4
  7. Jul 31, 2017 #5
    benrab

    benrab Medium Load Member

    326
    238
    Apr 5, 2015
    Quebec ,Canada
    0
    Also i recommand you to pay attention the oil lines (2) with fine thread (18 Mm 1.5 pitch) in aluminium egr valve casting for crossthread at installation.
    Install the new egr valve with all bolts loose, install oil hoses, torque egr valve bolts, will help you to install those hoses.
     
    benrab, Jul 31, 2017
    benrab, Jul 31, 2017
    #5
    bonous, Johny41 and KB3MMX Thank this.
  8. Nov 16, 2018 #6
    Daeron Burton

    Daeron Burton Bobtail Member

    1
    0
    Jan 29, 2016
    Roanoke, Texas
    0
    Have a 2004 d12 have a code for egr valve position 1 current below normal or open. Should there be resistance resistance on the valve if so how many ohms. If not how many volts from the engine harness
     
    Daeron Burton, Nov 16, 2018
    Daeron Burton, Nov 16, 2018
    #6
  9. Nov 16, 2018 #7
    nasriza

    nasriza Road Train Member

    2,397
    2,070
    Feb 1, 2013
    Chicago, IL
    0
    there should be resistance on the pins for the position sensor and it's a 3 pin dont know exact spec but 100% valve needs to be replaced. being that that sensor is part of valve and doesn't come seperate.
     
    nasriza, Nov 16, 2018
    nasriza, Nov 16, 2018
    #7
  10. Nov 22, 2018 #8
    benrab

    benrab Medium Load Member

    326
    238
    Apr 5, 2015
    Quebec ,Canada
    0
    Only for information you can use the Egr Valve sensor come from a Cummins ISX CM 870, that part is available through Cummins parts and fit on D-12D Egr Valve.
    Ben
     
    benrab, Nov 22, 2018
    benrab, Nov 22, 2018
    #8
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.