oil in coolant reservoir detroit 60 series

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by kazungu80, Jul 5, 2017.

  1. kazungu80

    kazungu80 Bobtail Member

    17
    8
    Aug 27, 2012
    0
    I have a freightliner century with pre egr detroit 60 series motor.I noticed trees of oil in my coolant reservoir tank and immediately changed the oil cooler with a new one & flushed it like 3 times.Thinking everything was ok I drove it for 7000 miles and noticed more oil.The oil looked fresh & I am pretty sure it's not the old oil cleaning out.Has anyone else experienced this kind of a problem before?
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. AModelCat

    AModelCat Road Train Member

    28,868
    154,534
    Jul 7, 2015
    Canuckistan
    0
    Check transmission cooler if its an oil to coolant style. Could eventually ruin transmission if coolant transfers into transmission. Oil in transmission will be milky if coolant is getting mixed in.
     
  4. kazungu80

    kazungu80 Bobtail Member

    17
    8
    Aug 27, 2012
    0
    I have an external transmission oil cooler though
     
  5. baha

    baha Road Train Member

    4,137
    2,835
    Jul 25, 2013
    ga
    0
    Send off a sample of the oil with 7000 mi on it to a lab, you can buy a kit at parts store or truck stop, you may have a pin hole in a cil. liner?or o/rings did not seal on cooler job?
     
  6. QUALITYTRUCK

    QUALITYTRUCK Road Train Member

    1,801
    1,762
    Jun 14, 2009
    romulus,mi
    0
    You have a pin hole in liner like Baha said. In 20 years of doing this I have only encountered 2 bad series 60 oil coolers putting oil into coolant. One of them might not have even been bad but customer insisted on oil cooler. Never seen him again.
     
  7. aussiejosh

    aussiejosh Road Train Member

    4,709
    5,408
    Aug 28, 2009
    Airlie Beach QLd
    0
    Oil in the water sounds very much like a cracked head
     
  8. kazungu80

    kazungu80 Bobtail Member

    17
    8
    Aug 27, 2012
    0
    Will do.thanks for the tip
     
  9. kazungu80

    kazungu80 Bobtail Member

    17
    8
    Aug 27, 2012
    0
    @baha was right.I put my truck in the shop and after everything was taken apart my cylinder liners were really bad and had holes in them.As we speak the mechanic is doing a total overhaul. Thanks guys for your input.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.