mercedes benz axor

are you looking for used truck? Ore you wanna sell?

 

I would have to google it to find out what it is??!!!

 

I'll give you $20 for it.

 

i really dont like your way for discrimination everything what is not american .....
if you do that on my forum( i am admin of one truck forum) i would give you a ban i call that SPAM

since you probably never seen nor driven the same truck .......
I used to drive two similar trucks-one 4x2 and other 4x4 ( they were 1828 atego -at that time axor was only 394-428 hp tractor and atego was offered as 18 and 26ton truck and even as 4axle for UK)but that truck is same only difference is that this one have 330 7.2L engine and those two atego were 6.9L and 280hp

since i drove that truck i can say something more about this and i said it is junk comparing to actros i would 100 times more to have actros 1832/2032 than axor i really dont like those mid size trucks too small engine (volume)
too soft suspension something like this is very unstable comparing to real 18t truck ( don´t have rear auxiliary springs ) another thing i hate about that truck is its gearbox it was 6speed with split =12speed but it has too small overwall ratio and it is too fast in 1st gear and too slow in last gear ( it have 50mph at 2000rpm and lot of problems with starting i also dont like
transmission because it is not linear
( they only add splitter to 6speed gearbox which is used at 7.5ton atego ) so it is more like car transmission than truck

but for lighter job´s without trailer and without overloading
that truck is good enough it is over ton lighter comparing to actros and cheaper

but that truck is no too robust only once i had 47000lbs on rear axle that truck is just not for that


picture?
what kind of truck is that where are you from....what kind of bodywork does it have?
what year is it how many milles/km does it have

i just find some

http://suchen.mobile.de/fahrzeuge/s...lse&customerIdsAsString=&lang=de&pageNumber=5

http://suchen.mobile.de/fahrzeuge/s...lse&customerIdsAsString=&lang=de&pageNumber=6

 

Calm down partner, I don't discriminate against non-American trucks. In fact, my truck was built in Canada. I guess what my reply should have read was,

"I'm sorry I didn't reply to this thread, I've never seen one of those trucks, so I can't give you an educated number on what it's worth. Maybe you should include what the model year of the truck is, and other factors that change the value of the vehicle, like the mileage, specs, and so forth. That way, when somebody who is familiar with these trucks comes along, they'll have all the information they need to give you a ballpark figure on what the truck is worth."

Would that have made you happy? I posted my smart-aleck comment above because the OP was upset that no one had replied to his question. That was my way of saying, "I'm sorry, I don't have a clue." I notice that you didn't reply to this thread until something offended you-why didn't you help the man the first time around if you had information about these trucks?

 

because I was driving,and at that time, i came across roadworks 2lane highway and the emergency lane was converted to 4tracks in both direction....and i was heavy and long and truck already is wider than track so i cant drive and writing on cell phone with touch screen .....latter i must work ( it is tradition here to slaughter some pigs in late November/early December ) and i have today a 2pigs one 375lbs other 550lbs and i have a two for tomorrow)

 

Canada/USA same #### different pile.

 

Fair enough, I guess somebody's got to work around here..

Ha! Can I quote you on that?