Magnetic Overload sign

Never seen one myself, tag for possible information.

 

Instead of using the grommets,just put the bungee over the sign in like 4 places. One bungee on either end then a couple more spaced toward the center. I had 4 bungees that were the length needed to go from the upper flange to the lower flange of the bumper. Took about 2 minutes to set up and never lost a sign. Most truckstops carry a variety of bungee lengths.

 

Here is the magnet oversize sign:

http://www.oversizeloadsuperstore.com/magnet_mount.htm

 

why be in a hurry,when you are waiting to load is the time to atleast but your front sign on,i use 3 bungies wrapped around my bumper holding the o/s sign

 

I had a magnetic sign. Didn't stick very good at all. Lost part of it(three piece) on first trip. Now I just bought a regular one again with gromets and use 6 magnets to hold it on my bumper. Quick an easy

 

Just put a few bungee's holding it on like the two you see on the left and right side. I usually used 3 and i never had a problem.

 

A Magnetic OVERLOAD sign? Is I was overweight, I wouldn't advertise it.