LED replacement side lites?

http://grote.com/product.php?product_number=G5530

look at part #s there different for left / right with red on one side yellow the other or they have all yellow

 

If you change your turn signals to LED there's a good chance you'll have to get a flasher that's LED rated...

I switched all my lights to LED's and the original flasher wouldn't work.

 

Did you switch out the whole base, or did you switch the incandescent bulbs with LED bulbs?

If you replaced them with LED bulbs, where did you get yours? I have an International 9200i that i want to change out the front and side turn signals with LEDs but not sure where to get any

 

Yellow on the front, red to the rear of the truck. I have had a few 3 ton trucks that were set up this way.

 

if the front and rear are only illuminated when the signal is on all yellow is ok......if the front and back are lit up as running lights the rearward facing light must be red

 

ck out this web site www.fleetoilandtrucksupply.com. maximma has some pretty cool lights that should work. and I think I saw the cab lights your looking for.

 

should be 3 wires

white = ground

black = running / marker

red = signal flash / brake

thats the standard wiring for all multi function lights