Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

International 9100I Guages on dash not working Help diagnosing?

Discussion in 'International Forum' started by Farmer Ray, Feb 3, 2022.

  1. Feb 3, 2022 #1
    Farmer Ray

    Farmer Ray Bobtail Member

    1
    0
    Feb 3, 2022
    0
    Went to start truck and oil pressure,water temperature,voltage,fuel Guages won’t work.The dash lights work good and oil pressure and water temperature lights stay on.Truck starts fine.Will this be a dash cluster problem or could it be something else?Thanks
     
    Farmer Ray, Feb 3, 2022
    Farmer Ray, Feb 3, 2022
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Feb 5, 2022 #2
    Heavyd

    Heavyd Road Train Member

    7,749
    6,184
    Feb 4, 2009
    0
    Oil pressure, water temp and voltage are feed data from the engine, while the fuel gauge is just a variable resistor type sender in the tank with different wiring. I would suspect a bad center tach/speedo module. If you can find someone with an International 9000 series, you can swap the center dash piece to test it.
     
    Heavyd, Feb 5, 2022
    Heavyd, Feb 5, 2022
    #2
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.