I need to find a good CB radio shop that does installs.

I don't know of any off the top of my head, but I'd be happy to walk you thru an install if needed. It's actually pretty easy

 

If you haven't found one, you can go to cb shop in ontario,Ca. by the TA.

 

The best installer I know is at Exit 61 on I 44 at Hoods Truck Stop in MO. Doesn't help you much, but for future reference.............(he is a pretty darn good tech too and a nice guy to boot!)

 

There's nothing to installing a CB Radio...You just have 3 wires to hook up, and one of those is self-explanatory!

RED Wire go's to the Positive side of the battery
Black wire go's to negative side of battery (or just ground to firewall or any-other good grounding point)

The last wire is your antenna coax, which attaches to that big screw looking thing on the back of the radio, that has a hole in the center...

Pretty cut-and-dry...

 

If you're intent upon having someone else do your unstall, Advanced Electronics, Inc in Redondo Beach ("Redildo Beach" to locals) is hard to beat. I worked there 1978 --1981 and learned the two-way commercial trade there.

 

Like previous post said, easy to install yourself then have good shop check it out for you.
i see your from "over there" , joke there.
On your way home try going thru Eloy Az CB shop across from TA does darn good work, but....
i have a 4300-300 and the only shop that touches it is CB shop there in Altoona, IA at the old Bosselmans ( Flyin hook now) I had them install it in 2013 KW to get it right. And yes because I would've screwed it up, to much at stake w new trucks. Good luck.