on my KW t2000 1 of 2 air bags that holds the cab has crack and leaking air and the cab doesn't inflate, just being held by shocks and rubber pad. Can someone tell me the proper way on how to remove that bag. It has air fitting on the bottom and 1 bolt on top. I was thinking about:
1. unscrew bolt & unplug air line
2. block that air line
3. turn on the truck and let the other bag inflate
4. using leveling valve raise cab even more
5. remove bag upwards.
please correct me if i am wrong, or if i need to add more steps
How to replace cab air bag?
Discussion in 'Trucks [ Eighteen Wheelers ]' started by vadim2200, Jun 20, 2011.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
put a jack in between cab and crossmemeber--then dump all the air
vadim2200 Thanks this. -
I think you can do it that way, just be sure to block the cab up before you start working under it, I wouldn't trust that one bag holding it up with my hands and arms underneath it.
Diesel Dave and vadim2200 Thank this. -
-
just changed it, took me 25 min, didn't even tried to raise the cab,
-
Many times you can just take a pair of pliers, and squeeze the line to the leaking bag and the other bag will lift it, then you inset the block, and change the bag. It gives more room. If you got it done good for you!
-
Hey what size wrench or socket did you use? I got a freightliner 04. Got a one bag leaker
-
Save yourself some trouble and replace both bags.
-
Yes I found out yesterday my new ones is working the old one needs replacing and well I gotta shop for used and found one till I can get on my feet. Being an O/O is no walk in the park!
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2