Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

c13 acert coolant sensor location

Discussion in 'Trucks [ Eighteen Wheelers ]' started by Bilson1, May 2, 2013.

  1. May 2, 2013 #1
    Bilson1

    Bilson1 Bobtail Member

    3
    0
    May 2, 2013
    0
    I have an '07 Pete w/a c-13 acert. The engine code tells me the high coolant sensor is faulty. Where is it located? Can't seem to find any sensors in the head. Thanks
     
    Bilson1, May 2, 2013
    Bilson1, May 2, 2013
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. May 2, 2013 #2
    jameslawton

    jameslawton Light Load Member

    257
    65
    May 1, 2013
    Tulsa OK
    0
    its on the tsate housing u might have to take off alt or ac compresser to see and get to it
     
    jameslawton, May 2, 2013
    jameslawton, May 2, 2013
    #2
  4. May 7, 2013 #3
    Bilson1

    Bilson1 Bobtail Member

    3
    0
    May 2, 2013
    0
    Thanks jameslawton. I found it underneath the thermostat housing, behind the accesories mounting plate. Needed to remove the fan hub to get to it.
     
    Bilson1, May 7, 2013
    Bilson1, May 7, 2013
    #3
  5. May 7, 2013 #4
    GrapeApe

    GrapeApe Road Train Member

    2,215
    2,211
    Jan 7, 2013
    0
    You usually can get to it through a hole in the accessory mounting bracket if you take off the main belt. Removing the tensioner may help too. I never had to pull the fan hub, but you may have a different set up.
     
    GrapeApe, May 7, 2013
    GrapeApe, May 7, 2013
    #4
  7. May 7, 2013 #5
    jameslawton

    jameslawton Light Load Member

    257
    65
    May 1, 2013
    Tulsa OK
    0
    yeah i have never removed the fan hub to change one but always a first for everything and glad to know its working for u
     
    jameslawton, May 7, 2013
    jameslawton, May 7, 2013
    #5
  8. May 8, 2013 #6
    Bilson1

    Bilson1 Bobtail Member

    3
    0
    May 2, 2013
    0
    Had to remove the fan to get into the hole in the bracket. If the fan was mounted lower, I may have been able to get to it. I couldn't get my hand in there to undo the plug. Maybe my hands are too big. LOL Thanks
     
    Bilson1, May 8, 2013
    Bilson1, May 8, 2013
    #6
  9. May 8, 2013 #7
    jameslawton

    jameslawton Light Load Member

    257
    65
    May 1, 2013
    Tulsa OK
    0
    yeah its all good as long as u got it changed dont make much diff how u did it still cheaper then paying $115 A hour for a shop to do it
     
    jameslawton, May 8, 2013
    jameslawton, May 8, 2013
    #7
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.