what trailer (if any) will have 29 (or close) in the well and be 41 foot from kingpin to center of rear axle group. Do you know is such a trailer out there and if not whats the closest available.
buying a rgn n staying legal
Discussion in 'Heavy Haul Trucking Forum' started by Tommyk, Feb 5, 2017.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
29 ft well is standard for a 2axle rgn, it will be a 48 ft trailer, no king pin laws, even California, that is why you get a flip axle if you need a 3rd axle.
Good luck, you have a lot to learn.sawmill, FerrissWheel, not4hire and 4 others Thank this. -
-
Buy a standard 48 with or without flip from XL, Trailking, Fontain etc.
Don't buy some off brand strange configuration, you won't be able to sell if things don't work out.noluck Thanks this. -
FerrissWheel, snowman_w900, passingthru69 and 1 other person Thank this.
-
Like all said king pin doesn't matter if it's a 48 footer. Any standard 30,35 or 40 ton trailer come with that well lenght. With out the flip your good to go.
snowman_w900 Thanks this. -
I will say though. Why are you trying to stay legal? Don't see much money in legal rgn loads! And if you need a permit it's just as easy to add lenght as well as width. Just fold her up when mt. I've have gotten a little lazy about it lately. As 99% of the time I need it down. But I know what states will let me slide and which will not too!
-
Old man, you are correct, I have lots to learn and hopefully i'll learn it without too many casualties. I do respect the opinion of people like yourself who have done it. I have ran step decks hauling machines and vehicles with some oversize but no experience with lowboys. I have a small amount of freight moving wheel loaders for a local dealer but mostly i'll be getting loads from the load boards. I don't intend hauling anything over 55000 pounds. Truck is paid for and I intend to trade my current trailer for a RGN. With no RGN experience and so many variables its near impossible for me to order a trailer without advise and you cannot believe the sales guy.
I really would like to know is it worth paying an extra $15000 to get a Fontaine/XL/Tarbert/Trail King over a Kaufman which is $50K as opposed to 65-70K.
I am looking at a Kaufman 48 foot, 29 in the well, Hydraulic detach that they will build, do you consider this a "off" make of trailer that will give me trouble or I won't be able to sell. -
Jump right in the deep end....
FerrissWheel and soloflyr Thank this. -
I don't know what your situation is with loads, but from my experience lately- under 55k pays step rate & then all you have is a heavy trailer that you can haul a few tall loads on. My TK 35t is going away for that reason.
not4hire, Oxbow, snowman_w900 and 1 other person Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2