Axle weight question

Discussion in 'Prime' started by Ditch Doctor, May 4, 2013.

  1. ironpony

    ironpony Road Train Member

    17,502
    12,015
    Sep 23, 2007
    Ask my GPS...
    0
    Not good! You need to slide your tandems to the rear until you're under 34 on those trailer tires.

    You bet yer bippy on that one! Any extra should be on the drives, and for my money I'll usually slide the tandems one more hole to put an extra portion on those drives as well. Michelin's website has a paper showing the trailer adds more to the rolling resistance than either the steers or drives, so unloading the trailer tires especially if they're wide singles seems to work for me.

    This is a Prime thread, and our management is a little sensitive to this- seems a lot of folks don't display the common sense to actually scale their loads! Imagine that!!

    Most of our tractors are being ordered with 12,500lb rated axles on the steers, so you're good to that plus there's the APU weight allowance that's good in just about all of the states. So, we're at 12,500 max on the steers, weight distributed evenly between the drives and tandems not to exceed 34,000 with the extra on the drives, and a GCVW of 80,400 pounds max.

    I'm not sure how the fuel weight distribution works on the newer tractors since the tanks are mounted further back, but on my '09 Cascadia, they're mounted forward. So, I have my 5th wheel set to place about 12,500lbs on the steers with as much load in my trailer as possible, and full fuel to get to 80,400 lbs gross.
     
    Last edited: May 5, 2013
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Hammer166

    Hammer166 Crusty Information Officer

    7,350
    26,437
    Aug 18, 2007
    ~8600+' and loving it!
    0
    Dang! You mean carhaulers are heavy haul? Who freaking knew?!? :what:



    /sarc
     
  4. emton

    emton Medium Load Member

    543
    169
    May 18, 2009
    Hobart, IN
    0
    Most of the Prime trucks I've looked at have a sticker on the inside of driver's door stating the axle is rated at 12,000 lbs. Mine sure does.
     
  5. ironpony

    ironpony Road Train Member

    17,502
    12,015
    Sep 23, 2007
    Ask my GPS...
    0
    So does mine. It's the newer ones, at least that's what that moron in charge of maintenance claims. Got a new truck yet?
     
  6. emton

    emton Medium Load Member

    543
    169
    May 18, 2009
    Hobart, IN
    0
    He claims many things, doesn't he? Not new, got a ways to go on my 2011. Still feels new though, except for the seat!
     
  7. awbro

    awbro Light Load Member

    170
    52
    Oct 24, 2012
    Tucson, AZ
    0
    Just took a look at my frame sticker on my '14 cascadia.... 12,000 not 12,500


    Sent from my iPhone 5 using Tapatalk 2
     
  8. ironpony

    ironpony Road Train Member

    17,502
    12,015
    Sep 23, 2007
    Ask my GPS...
    0
    So is the 2014 an Evo?

    8 weeks left on my '09.
     
  9. awbro

    awbro Light Load Member

    170
    52
    Oct 24, 2012
    Tucson, AZ
    0
    Mine isn't. When I picked this up about 8 weeks ago I heard we are getting them they just weren't in yet. Overheard someone say there was an issue with the evos and on guard.


    Sent from my iPhone 5 using Tapatalk 2
     
  10. Ditch Doctor

    Ditch Doctor Medium Load Member

    387
    297
    Jul 16, 2012
    Olathe, KS
    0
    Since I can never seem to get a trailer with the hole restrictions listed on them for certain states, does anyone have a cheat sheet?
     
  11. Chucktaylor

    Chucktaylor Road Train Member

    1,065
    640
    Sep 26, 2012
    0
    Look in your fuel book. Its in there. Or it has been thru 2012. Im too lazy to check my current edition right now, but tradition has it in there, somewhere, every year I have worked here.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.