Airline Schematics on a 1982 W900A model

Discussion in 'Trucks [ Eighteen Wheelers ]' started by freightlinerfever11, May 21, 2013.

  1. freightlinerfever11

    freightlinerfever11 Light Load Member

    255
    50
    Apr 4, 2010
    East of the Rockies
    0
    Im looking for a little help trying to find airline schematics for my A model before I go stripping them off the frame, Im gonna have to run all new airlines so I was looking for a little guidance in that regard, or if somebody has ideas on how to mark the lines so I know where they should go back too....Any help would be greatly appreciated :biggrin_25519:
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Heavyd

    Heavyd Road Train Member

    7,749
    6,184
    Feb 4, 2009
    0
    Take pictures of your valves, label all your lines and keep record on paper.
     
  4. freightlinerfever11

    freightlinerfever11 Light Load Member

    255
    50
    Apr 4, 2010
    East of the Rockies
    0
    Ive been taking pictures too of everything I guess I just want to go above and beyond...Drawing it out on paper would be an excellent idea...Thanks!
     
  5. freightlinerfever11

    freightlinerfever11 Light Load Member

    255
    50
    Apr 4, 2010
    East of the Rockies
    0
    Is there anyway to get a service manual at all or is it too old?
     
  6. SmokinCAT

    SmokinCAT Road Train Member

    1,773
    1,487
    Oct 20, 2010
    Hillsboro, OH./ Adrian, MI
    0
    Do this, even with a schematic I doubt you would be able to figure out where things were supposed to go. If it were me I would do them one at a time, this is the way I will be doing mine.
     
  7. Heavyd

    Heavyd Road Train Member

    7,749
    6,184
    Feb 4, 2009
    0
    As for International we have nothing that goes that far back. We also do not have air line schematics for the trucks. I do not work at a Kenworth dealer, so I am only guess it would be the same with them.
     
  8. wwp2343

    wwp2343 Light Load Member

    84
    7
    Jun 14, 2010
    PA
    0
    Call Spencer's chrome in Pa, they build a lot of A models and could most likely piont you in the right direction
     
  9. Down under trucker

    Down under trucker Light Load Member

    145
    62
    Jun 22, 2012
    Brisbane, Australia
    0
    Don't know of they do it in the states but in Aus Kenworth keep file records of every part of every truck that has ever been built. You can even get parts reproduced because they have the records. Try ringing them.
     
  10. truckmechanic

    truckmechanic Medium Load Member

    534
    140
    Jan 14, 2012
    Hi Desert Ca
    0
    Find a piece of underground phone line its roughly 1" in diameter and has probably 500 small wires in diffrent colors you can mark the hose and fittings with them
     
  11. freightlinerfever11

    freightlinerfever11 Light Load Member

    255
    50
    Apr 4, 2010
    East of the Rockies
    0
    That's what Im doing just marking all the lines with old phone cable and I took a bunch of pictures so that should also help...Thanks for the reply!
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.