2000 century AC shroeder valve

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by henboy1, Jul 29, 2018.

  1. henboy1

    henboy1 Medium Load Member

    331
    139
    Mar 26, 2011
    stockbridge
    0
    I have a leaking shroeder valve on the low side ( service port). Freightliner do not sell the shroeder valve tool. I went to O' Reilly , Advance and Auto zone, and I couldn't find that tool to remove the bad valve stem . I tried using the valve stem removable tool and it didn't fit . Is this tool different from a tire's valve stem tool? Is the shroeder valve also different from a regular tire valve stem ?
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Goodysnap

    Goodysnap Road Train Member

    3,694
    8,948
    Jul 12, 2017
    0
    AC Schrader valves use a larger tool than a tire valve. The cores can vary by style depending on the truck. Sometimes they sure can be stuck good and I have even broke many of the tools trying removal. Might just be further ahead to replace the line with the service port on it and be done.
     
    Hulld and henboy1 Thank this.
  4. Hulld

    Hulld Road Train Member

    2,882
    6,564
    Oct 19, 2015
    Upstate NY
    0
    I had one that was leaking and ran in to the same tool availability problem.
    I was able to drain mine down and then put a few drops of pag oil down in the valve and then worked it up and down a bit and then recharged it.
    It’s been holding since March with zero leaks so far.
     
    henboy1 Thanks this.
  5. henboy1

    henboy1 Medium Load Member

    331
    139
    Mar 26, 2011
    stockbridge
    0
    Pag oil? I will go get it if I can't change the valve . Good info .
     
  6. Hulld

    Hulld Road Train Member

    2,882
    6,564
    Oct 19, 2015
    Upstate NY
    0
    Pag oil is the oil used in air conditioning systems.
    You can buy it in any parts store.
     
    henboy1 Thanks this.
  7. henboy1

    henboy1 Medium Load Member

    331
    139
    Mar 26, 2011
    stockbridge
    0
    Thanks I just got it
     
    Hulld Thanks this.
  8. henboy1

    henboy1 Medium Load Member

    331
    139
    Mar 26, 2011
    stockbridge
    0
    I purchase the tool, but I didn't change the Schrader valve. I also got some PG 100 and put around the Schrader valve. Let's see how it holds up
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.