200 + watt mobile CB radio set up for sale

I'm selling this as a package deal. You get a 40 channel CB radio with mic, a linear amp, a PA horn plus the required wiring harness with relay for both the radio and the amp. The radio is already set to work with this amp. This is a plug and play deal.

The only thing not included is the radio mounting bracket, but those can be found at any truck stop.

The radio is a Midland 77-155. Has mic gain, instant ch. 9, hi/low speaker tone, PA and it even has a distant/local switch--this really comes in handy when you don't care to hear everyone on skip and just want to hear the guy a few miles up the road. The radio also comes with a Diesel 360-B dynamic mic.

The radio works excellent. The case is scratched up, nothing some spray paint couldn't fix.

The amp is a Maco Mite II. Hooked to this radio, this amp dead keys at 50 watts and swings to over 200 watts PEP.

This amp will come with a home made wiring harness that is roughly 6 feet long, and consists of two 12 gauge power wires, one red and the other black. There is a relay inline with the hot (red) side as well as a typical 3 pin wiring harness for the CB. You hook the wires directly to your trucks battery, then you use a switched 12 vdc source to turn the radio and amp on/off. I will also throw in a 6 foot piece of RG8X coax with soldered on PL259's to hook the radio and amp together. This amp works great.

Also included is a Barjan metal PA horn.

I'm asking $100 for everything. I am located in Missouri, in between Warrensburg and Sedalia. I can meet you somewhere along U.S. 50. For a small fee I'd be willing to meet at the T/A in Concordia along I-70.

If you want it shipped, factor in another $15 good anywhere in the lower 48 states. I do accept PayPal please add 5%.

 

Nope, sold them a long time ago.