Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

03 T600 - How does the dash come apart?

Discussion in 'Kenworth Forum' started by dieselfuelonly, Nov 8, 2014.

Page 1 of 2
  1. Nov 8, 2014 #1
    dieselfuelonly

    dieselfuelonly Road Train Member

    2,475
    5,086
    Nov 12, 2012
    Chapel Hill, NC
    0
    I'm trying to remove the factory head unit and replace it with a newer one on my truck, it's a 2003 T600. I removed all the screws along the top of the dash panel (near the defroster vents) thinking the top piece would separate from the rest. Instead it still appears to be attached to the whole entire dash assembly and I can move the entire assembly back and fourth a bit. Is there a way to separate the horizontal piece from the vertical face of the rest of the dash? Can't figure this out and don't want to force it too much and crack something. Thanks!

    [​IMG]
     
    dieselfuelonly, Nov 8, 2014
    dieselfuelonly, Nov 8, 2014
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Nov 8, 2014 #2
    skateboardman

    skateboardman Road Train Member

    6,232
    5,706
    Jan 14, 2012
    flatbed heaven
    0
    what do you mean by head unit?
     
    skateboardman, Nov 8, 2014
    skateboardman, Nov 8, 2014
    #2
  4. Nov 8, 2014 #3
    dieselfuelonly

    dieselfuelonly Road Train Member

    2,475
    5,086
    Nov 12, 2012
    Chapel Hill, NC
    0
    Stereo, cd player, whatever you want to call it.
     
    dieselfuelonly, Nov 8, 2014
    dieselfuelonly, Nov 8, 2014
    #3
  5. Nov 8, 2014 #4
    rbrtwbstr

    rbrtwbstr Road Train Member

    3,329
    7,589
    Jul 11, 2012
    in the bush somewhere
    0
    Does the radio have holes on the left and right side of the faceplate? There should be four, two on each side. If you stick something in each hole at the same time, and gently pry outward on whatever you stick in the holes, that will release the radio from the metal frame around it. Then just pull it out, disconnect wires and replace with new radio. There's a radio removal tool just for that style radio, but I dunno where you'd get one
     
    rbrtwbstr, Nov 8, 2014
    rbrtwbstr, Nov 8, 2014
    #4
    dieselfuelonly Thanks this.
  7. Nov 8, 2014 #5
    QUALITYTRUCK

    QUALITYTRUCK Road Train Member

    1,801
    1,762
    Jun 14, 2009
    romulus,mi
    0
    you get the tools at any auto parts store.they are called "Ford radio removal tools"They were used by Ford for many years.Takes about 5 seconds with tools.Google it so you can see what they look like.O'reilly"s sells it for sure.Taking dash off/apart won't even help you if you succeeded.Radio is made to slip in/out of it's cage.good luck.
     
    QUALITYTRUCK, Nov 8, 2014
    QUALITYTRUCK, Nov 8, 2014
    #5
    dieselfuelonly and MJ1657 Thank this.
  8. Nov 8, 2014 #6
    dieselfuelonly

    dieselfuelonly Road Train Member

    2,475
    5,086
    Nov 12, 2012
    Chapel Hill, NC
    0
    I was wondering about those 4 little holes. I'll try sticking something in them and give it a shot.

    Thanks, I'll grab the tool if I can't get anywhere with coat hangers. I'd still like to know how to get the dash apart in case I ever need to. Is that top piece supposed to separate?
     
    dieselfuelonly, Nov 8, 2014
    dieselfuelonly, Nov 8, 2014
    #6
  9. Nov 8, 2014 #7
    Thed302

    Thed302 Light Load Member

    114
    70
    Oct 30, 2014
    USA
    0
    Please, don't risk it. Just spend the $5 for those little tools at AutoZone. If you break a coat hanger in there then you HAVE to take the dash apart.
     
    Thed302, Nov 8, 2014
    Thed302, Nov 8, 2014
    #7
    dieselfuelonly Thanks this.
  10. Nov 8, 2014 #8
    bjytech

    bjytech Light Load Member

    229
    207
    Nov 9, 2013
    Ohio
    0
    The dash top doesn't come off... at least not in any easy way. Anything that needs done inside the dash can be done through the front panels.
     
    bjytech, Nov 8, 2014
    bjytech, Nov 8, 2014
    #8
    dieselfuelonly Thanks this.
  11. Nov 8, 2014 #9
    dieselfuelonly

    dieselfuelonly Road Train Member

    2,475
    5,086
    Nov 12, 2012
    Chapel Hill, NC
    0
    It came out real easy with the coat hangers. I made sure to use some thick ones so there wasn't a risk of them breaking off. It didn't really take much of any pressure at all on them to get the thing to come out. Thanks for the help everyone. The list of things to do is getting smaller...
     
    dieselfuelonly, Nov 8, 2014
    dieselfuelonly, Nov 8, 2014
    #9
  12. Nov 8, 2014 #10
    Thed302

    Thed302 Light Load Member

    114
    70
    Oct 30, 2014
    USA
    0
    No worries as long as it came out OK. What HU are you going to replace it with?
     
    Thed302, Nov 8, 2014
    Thed302, Nov 8, 2014
    #10
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 1 of 2