mercer transportation

Not your average everyday van freight. Here I'm unloading at a farm supply store in the middle of nowhere. I had to pull across the road in front on me to back in. Keep in mind, that is a 2 lane highway I'm backing across. Lol. The nose of my truck is about 6 inches from the road. So what do we do next? Go down the road a ways & load tractors. Yep, tractors. 3 of them. Lol. The place I picked them up at wasn't designed for trucks (surprise, surprise) but we managed to pull in & get into position. Never a dull moment. Lol. It's actually nice to pull stuff like this instead of the boring normal freight. The guy that unloaded me in the first pic was a good dude. A nice switch from the normal grumpy people we usually deal with.

 

I'm not sure which post you are referring to but I had scrolling issues in unit list and available loads list at different times. Had load matching issues and refreash issues and fat finger issues (that reset button is the dumbest thing) and on and on. What issues are there today? I have no idea, I was offered a workaround that made the site workable for the first time and I don't have anymore money to waste on those Yahoo!'s

 

Are we gonna get loaded today? Or is it gonna be another layover pay lol

 

The browser app "Auto Refresh" not only allows you to select "Request Desktop Site" in the settings but set how often you want it to automatically refresh the page. I used to be able to set it to search for the word "Matched" and a banner and audible alarm would alert you that you had matched to a load so you could be searching without even looking at the screen but the popup window and colored dot system killed that.

 

I left out a word, I meant to say," i thought you could NOT scroll to see all your matched loads from unit list. As i said i thought that was main issue. That's all

 

If enough people complain and they fix that be sure to explain how to setup that trick to us not IT guys

 

Anyone else notice if your Cord accepts a load for you its not showing anything on the web?

 

These are the settings you would use to refresh the page every 60 seconds and search for the word "Matched".
After this is set up you would close settings, log on to the board, do your first search and then press the start button at the bottom of the page. You will see a red box in the top left corner of the page counting down to zero and then the page will refresh and the timer will reset to whatever you had it set to and count down again.
It worked great on the old Contractor web.

 

In "Available Loads" you should see a green dot next to the load that's accepted.